 | K6 high-speed machining center |
|---|
| project | unit | parameter | |||
| The workbench | Table size | mm | 680X520 | ||
| The workbench bearing | Kg | 350 | |||
| T slot size | n-mm×mm | 4-14X125 | |||
| Processing range | The X axis range | mm | 660 | ||
| Y range | 520 | ||||
| The Z axis range | 320 | ||||
| The spindle end face to the workbench | The biggest | 460 | |||
| The minimum | 140 | ||||
| The spindle | The spindle taper hole | / | BT30 | ||
| Speed (Max) | rpm | 30000 | |||
| torque | Nm | 8.8 | |||
| Main motor power | kw | 5.5 | |||
| Knife library | The biggest tool length | mm | 135 | ||
| Knife library form | / | Disc type manipulator knife library | |||
| Dao database is | the | 24 | |||
| The largest diameter cutter | With a knife | mm | 60 | ||
| Adjacent empty knife | mm | 80 | |||
| Maximum tool weight | Kg | 3 | |||
| Tool change time | s | 1.2 (primary) | |||
| feed | A cutting feed speed range | m/min | 1 ~ 15 | ||
| Fast moving speed | The X axis | m/min | 30 | ||
| Y | |||||
| The Z axis | |||||
| Positioning accuracy | Positioning accuracy | The X axis | mm | 0.008 | |
| Y | 0.008 | ||||
| The Z axis | 0.008 | ||||
| Repeat positioning accuracy | The X axis | 0.004 | |||
| Y | 0.004 | ||||
| The Z axis | 0.004 | ||||
| Numerical control system | / | Mitsubishi M80A/M80B | |||
| Electric capacity | KVA | 20 | |||
| Machine tool dimensions | long | mm | 1830 | ||
| wide | 1940 | ||||
| high | 2680 | ||||
| Air supply | Mpa | 0.6 | |||
| The total weight of machine tool | Kg | 5000 | |||
